MANUAL - PNEUMATIC ACTUATORS TYPES DA + SR
-2-
1. applicable range The Pneumatic Actuators Fergo use a rack and pinion sliding system that creates a linear torque with a quarter turn operation. The range is the following:
SERIE DA DA-20 DA-40 DA-80 DA-130 DA-200 DA-300 DA-500 DA-850 DA-1200 ...
页2 的7
MANUAL - PNEUMATIC ACTUATORS TYPES DA + SR
-3-
1.1.2 actuator size SR40 & SR80 The actuators SR-40 & 80 use a minimum of 2 springs and a maximum of 7 springs on each side, accordin gto the diagrams below, depending on the springs combination that require to be assembled.
[ S04 ]
[ S06 ]
[ ...
页3 的7
MANUAL - PNEUMATIC ACTUATORS TYPES DA + SR
-4-
2.1 statemant Fergo Actuators sizes 300 and smaller Fergo GmbH states that Fergo Actuators covered by this Certificate have been designed and manufactured in accordance with the following European Directives requirements: » » » » » » ...
页4 的7
Stoffschieber FM200
FERGO® FM200 - Stoffschieber
Der Stoff- oder Plattenschieber Typ FM200 ist ein einseitig dichtender Zwischenflanschschieber geeignet für allgem...
14 网页, Deutsch
页1 的14
Betätigungen
Handrad, steigende Spindel: Handrad:
Kettenrad:
Hand-Getriebe:
Elektro-Motor:
Pneumatisch doppelwirkend:
Zeichnungen und Materialangaben können von uns ohne Mitteilung verändert werden.
Schnellschluss-Handhebel:
Pneumatisch einfachwirkend:
einen Industrieeinsatz. Die ...
页2 的14
17
DETAIL A
ØV
16
15 14
Metallisch
13 5 12 11 10
19 18
Weich
E
4
9 8
D
3
7
2 6
15° Kegel mit Metallsitz
1
B
ØK
15° Kegel mit weichem Sitz
C
DN
P
weichem Sitz 8° Scharber mit wei
A
15° Scharber, 8° Kegel mit weichem Sitz
DETAIL B
24 23 22
21 20
FM200 - steigende ...
DOKUMENTATION - PNEUMATIK ANTRIEBE TYPEN DA + SR
-2-
1. Einsatzbereiche Die pneumatischen Stellantriebe sind nach dem Ritzel und Zahnstangen Prinzip entwickelt, welches eine 90° C Bewegung erzeugt. Folgende Stellantriebstypen sind verfügbar:
SERIE DA DA-20 DA-40 DA-80 DA-130 DA-200 DA-300 ...
页2 的7
DOKUMENTATION - PNEUMATIK ANTRIEBE TYPEN DA + SR
-3-
1.1.2 Antriebsgröße SR40 & SR80 Der Antrieb arbeitet mit einem Minimum von 2 Federn und mit einem Maximum von 7 Federn auf jeder Seite, abhängig von der Federkombination werden diese wie nachstehend abgebildet montiert.
[ S04 ]
[ S06 ] ...
页3 的7
DOKUMENTATION - PNEUMATIK ANTRIEBE TYPEN DA + SR
2.1 Erklärung Antriebsgrößen DA20 bis DA300 Die pneumatischen Stellantriebe wurden nach folgenden Europäischen Richtlinien entworfen und hergestellt. » » » » » » » » Europäische Druckgeräte-Richtlinie 97 / 23 / CE Klassifiziert nach ...
页4 的7
Knife gate valve FM200
FERGO® FM200 - Knife Gate Valve
The FERGO FM200 knife gate is an uni-directional wafer or lug valve designed for general industrial service...
14 网页, English
页1 的14
Operations
Handwheel, rising stem: Handwheel:
Chainwheel:
Gear box:
Electric actuator:
Pneumatic double acting:
Design and materials can be changed without notice. Errors and omissions excepted
Hand lever:
Pneumatic single acting:
ions.
Tel.: +49(0) 2137 - 9 30 80-0 Fax: +49(0) 2137 - 9 ...
页2 的14
17
DETAIL A
ØV
16
15 14
Metal seat
13 5 12 11 10
19 18
Soft seat
E
4
9 8
D
3
7
2 6
15° Cone with Metal seat
1
B
ØK
15° Cone with Soft seat
C
DN
P
Soft 8° Scraper with S seat
A
15° Scraper, 8° Cone and Soft seat
DETAIL B
24 23 22
21 20
FM200 - rising stem ...
With FERGO® Valves GmbH you command a competent and faithful partner for the control engineerings‘s sector. We enjoy to advise you about any kind of valves, isolating valves and check valves, as well as pneumatic and electric actuators. Of course we also oer you wide-ranged solutions for ...
页3 的20
Table of contents
Knife gate valves Buttery valves Throttle valves/ High temperature valves Ball valves Disc check valves/ Check valves Sight glass valves Strainer Globe valves Gate valves Actuators
Page 8 to 17
Page 18 to 19
Page 20 to 21
Page 22 to 25
Page 28 to 31
Page 31
Page 31
Page ...
- Drossel- und Hochtemperaturklappen
Mit der Serie SB200 erhalten Sie eine robuste Klappe, die eine durchgehende Welle mit verschiedenen Verstärkungen der Klappenscheibe hat, um Verformungen bei verschiedenen Temperaturen und Dierenzdrücken zu minimieren. Die Klappe ist mit äußeren ...
页2 的7
KUGELHòHNE
Kugelhähne eignen sich besonders gut um üssige Medien zu regeln. Durch die Kugel, die jedem Muen- und Flanschkugelhahn innewohnt, kann diese Armatur ideal bei hohen Druckstufen verwendet werden. Standardmäßig bieten unsere Kugelhähne den vollen Durchgang. Auf Wunsch ist jedoch ...
页3 的7
KUGELHòHNE
2-Wege-Flanschkugelhähne
Die 2-Wege-Ausführung regelt nach dem Schema ŚLeitung Auf/ZuŤ. Je nach Bedarf können Sie zwischen 2- oder 3-teiligen Kugelhähnen wählen. Diese Armatur können wir Ihnen zusätzlich auch mit PTFE-Auskleidung anbieten.
Technische Daten
Betätigungen: ...
Mit der FERGO® Armaturen GmbH verfügen Sie über einen kompetenten und zuverlässigen Partner im Sektor der Regelungstechnik. Wir beraten Sie gern bei jeglichen Arten von Schiebern, Absperr- und Rückschlagarmaturen, sowie pneumatischen und elektrischen Antrieben. Selbstverständlich bieten ...
页3 的18
Inhaltsverzeichnis
Stoschieber Absperrklappen Drosselklappen/ Hochtemperaturklappen Kugelhähne Rückschlagarmaturen Schauglasarmaturen Schmutzfänger Ventile Schieber Antriebe
Seite 8 bis 17
Seite 18 bis 19
Seite 20 bis 21
Seite 22 bis 25
Seite 28 bis 31
Seite 31
Seite 31
Seite 32 bis ...
Mit der FERGO® Armaturen GmbH verfügen Sie über einen kompetenten und zuverlässigen Partner im Sektor der Regelungstechnik. Wir beraten Sie gern bei jeglichen Arten von Schiebern, Absperr- und Rückschlagarmaturen, sowie pneumatischen und elektrischen Antrieben. Selbstverständlich bieten ...
页3 的12
Inhaltsverzeichnis
Stoschieber Absperrklappen Drosselklappen/ Hochtemperaturklappen Kugelhähne Rückschlagarmaturen Schauglasarmaturen Schmutzfänger Ventile Schieber Antriebe
Seite 8 bis 17
Seite 18 bis 19
Seite 20 bis 21
Seite 22 bis 25
Seite 28 bis 31
Seite 31
Seite 31
Seite 32 bis ...
Mit der FERGO® Armaturen GmbH verfügen Sie über einen kompetenten und zuverlässigen Partner im Sektor der Regelungstechnik. Wir beraten Sie gern bei jeglichen Arten von Schiebern, Absperr- und Rückschlagarmaturen, sowie pneumatischen und elektrischen Antrieben. Selbstverständlich bieten ...
页3 的16
Inhaltsverzeichnis
Stoschieber Absperrklappen Drosselklappen/ Hochtemperaturklappen Kugelhähne Rückschlagarmaturen Schauglasarmaturen Schmutzfänger Ventile Schieber Antriebe
Seite 8 bis 17
Seite 18 bis 19
Seite 20 bis 21
Seite 22 bis 25
Seite 28 bis 31
Seite 31
Seite 31
Seite 32 bis ...
- Throttle and hightemperature valves
With series SB200 you will get a sturdy valve that has a through shaft with various reinforcements on the disc to minimize deformation in case uctuating temperature and dierential of pressure. The valve is equipped with external exposed ange ball bearings on ...
页2 的7
BALL VALVES
Ball valves are absolutely suitable to control liquid media. By the use of the ball, which is inherented to each sleeve- and ange ball valve, the valve can be perfectly used at high pressures. Standardly our ball valves hav a full bore. If requested a reduced bore is also available. ...
页3 的7
BALL VALVES
2-Way-Flange ball valve
The 2-way-design controls according to scheme ŒLine open/close•. According to your requirements you can choose 1-piece, 2-piece and 3-piece ball valves. We also supply this valve with PTFE-lining. Technical data
Operation: Size range: Pressure range: Body ...
With FERGO® Valves GmbH you command a competent and faithful partner for the control engineerings‘s sector. We enjoy to advise you about any kind of valves, isolating valves and check valves, as well as pneumatic and electric actuators. Of course we also oer you wide-ranged solutions for ...
页3 的14
Table of contents
Knife gate valves Buttery valves Throttle valves/ High temperature valves Ball valves Disc check valves/ Check valves Sight glass valves Strainer Globe valves Gate valves Actuators
Page 8 to 17
Page 18 to 19
Page 20 to 21
Page 22 to 25
Page 28 to 31
Page 31
Page 31
Page ...
GLOBE VALVES
Diaphragm Valve
Diaphragm vlaves are generally used to control a medium inside a pipeline. Especially for aggressiv and/or viscous media (with solids) the use of a diaphragm valve is recommended. Due to the design this valves are absolute tight and easy to maintain. Diaphragm valves ...
页2 的6
GLOBE VALVES
Vent-Valves / Air relief valves
Vent valves / Air relief valves are mainly used in silo structures or in water pipes. It‘s task is the pressure compensation inside a pipe or a container. By lling the silo the valve shall relief the pressure to prevent overpressure which could ...
页3 的6
GLOBE VALVES
Needle-Valves
The use of a needle-valve is highly recommended for subtle dosing at small size ranges, high temperature (up to 305°C) and high pressure (>100bar). This valves are absolutely suitable as shut-o device at measurement tasks for ll-level and ow rate.
Float-Valves ...
ACTUATORS
Pneumatic Part-turn actuator, up to 90°
Our pneumatic part-turn acutators of series FG are characterized by a steady switching capacity and absolute reliability. These actuators are available in two versions: As single-acting version (FG-SR), which closes or opens the valve in cas of ...
页3 的13
ACTUATORS
Electromotive Actuators
The electromotive turn-part actuators with an angle from 0° to 90° / 0° to 180° or freely denable angle, are constructed extremly compact and completely equipped to be easily operated. » Clear structure » Maintenace free » Flexability and safety through ...
Mit der FERGO® Armaturen GmbH verfügen Sie über einen kompetenten und zuverlässigen Partner im Sektor der Regelungstechnik. Wir beraten Sie gern bei jeglichen Arten von Schiebern, Absperr- und Rückschlagarmaturen, sowie pneumatischen und elektrischen Antrieben. Selbstverständlich bieten ...
页3 的20
Inhaltsverzeichnis
Stoschieber Absperrklappen Drosselklappen/ Hochtemperaturklappen Kugelhähne Rückschlagarmaturen Schauglasarmaturen Schmutzfänger Ventile Schieber Antriebe
Seite 8 bis 17
Seite 18 bis 19
Seite 20 bis 21
Seite 22 bis 25
Seite 28 bis 31
Seite 31
Seite 31
Seite 32 bis ...